Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5465 visitantes y 
2 usuarios online.
Productos
Información
Destacado
Inicio >> KENWOOD >> KRFA4020 Manual de Usuario
 
 0 artículo(s) en Su carrito 

KENWOOD KRFA4020
Manual de Usuario


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del KENWOOD KRFA4020 Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como archivo PDF después de que lo compre.

El Manual del Propietario (a veces llamado Manual del Usuario o Guía del Usuario) contiene información sobre cómo utilizar su dispositivo. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
In case of difficulty
KRF-A4020 (En/E2T)

Resetting the Microcomputer

18

If the microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition.

With the power cord plugged in, turn the POWER key OFF. Then, while holding down the ON/STANDBY key, press the POWER key.

� Please note that resetting the microcomputer will clear the contents of the memory and returns the unit to the state it was in when it left the factory.

Preparations Operations Other

Amplifier
Symptom No sound from the speakers. Cause � The speaker cords are disconnected. � VOLUME is set to the minimum position. � MUTE is ON. � The SPEAKERS switches are set to OFF. Remedy � Connect properly referring to �Setting the speakers�. 5 � Adjust the volume to a proper level. � Turn OFF the MUTE. ! � Set the SPEAKERS switch(es) to ON.

0

The standby indicator blinks and sound is not output.

� Speaker cords are short-circuited.

� Turn the power off, eliminate the shortcircuiting, then turn on the power again.

5

Sound is not output from one of the speakers. A humming noise is generated when the PHONO input selector is selected.

� The speaker cord is disconnected. � The audio cord from the turntable is not connected to the PHONO jacks. � The turntable is not grounded.

� Connect properly referring to �Setting the speakers�. 5 � Insert the audio cord plugs securely into the PHONO jacks. � Connect the grounding wire to the GND terminal on the rear panel. 4

Tuner
Symptom Radio stations cannot be received. Cause � No antenna is connected. � The broadcast band is not set properly. � The frequency of the desired station is not tuned. � Noise due to ignition noise from an automobile. � Noise due to interference from an electric appliance. � Noise due to a nearby TV set. � The preset station belongs to a frequency that cannot be received. � The preset memory was cleared because the power cord had been unplugged for a long period of time. Remedy � Connect an antenna. 5 � Set the broadcast band properly. � Tune the frequency of the desired station. # � Install the outdoor antenna away from the road. � Turn off the power to the appliance. � Install the receiver farther away from the TV. � Preset a station with a receivable frequency. � Preset the station again.

Interference.

A station which was preset cannot be received by pressing the corresponding numeric key.

Quizás también quiera comprar

$4.99

KRFA4020 KENWOOD
Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo genera…
>
Parse Time: 0.166 - Number of Queries: 100 - Query Time: 0.04