MDX-G3
DISASSEMBLY FOR REPAIR
1. How to Remove Front Panel
X09 (G/7) -CN502 X28-CN1
1. Remove 6 screws(1) from the rear side. 2. Remove 2 screws(2) from the bottom side. 3. Slide the front panel frontwards and pull out the connectors and FPC. 4. Remove the front panel from the rear cabinet.
2. How to Remove Top Panel
SP CONNECTOR
1. Remove 3 screws(3) from rear side. 2. Remove 3 screws(4) from top side. 3. Remove 3 screws(5). 4. Lift the top cover. Note: You need to pull out FPC on the rear side of top cover.
